Edimax CAP1750 User Manual

Edimax Pro NMS
132
Basic Settings
Name
Edit the access point name. The default name
is AP + MAC address.
Description
Enter a description of the access point for
reference e.g. 2
nd
Floor Office.
MAC Address
Displays MAC address.
AP Group
Use the drop down menu to assign the AP to
an AP Group. You can edit AP Groups from
the NMS Settings  Access Point page.
IP Address
Assignment
Select “DHCP Client” for your access point to
be assigned a dynamic IP address from your
router’s DHCP server, or select “Static IP” to
manually specify a static/fixed IP address for
your access point (below). Check the box
“Override Group Setting” if the AP is a
member of an AP Group and you wish to use
a different setting than the AP Group setting.
IP Address
Specify the IP address here. This IP address
will be assigned to your access point and will
replace the default IP address.
Subnet Mask
Specify a subnet mask. The default value is
255.255.255.0

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English