Edimax CAP1750 User Manual

Edimax Pro NMS
133
Default Gateway
For DHCP users, select “From DHCP” to get
default gateway from your DHCP server or
“User-Defined” to enter a gateway manually.
For static IP users, the default value is blank.
Primary DNS
DHCP users can select “From DHCP” to get
primary DNS server’s IP address from DHCP or
“User-Defined” to manually enter a value. For
static IP users, the default value is blank.
Secondary DNS
DHCP users can select “From DHCP” to get
secondary DNS server’s IP address from DHCP
or “User-Defined” to manually enter a value.
For static IP users, the default value is blank.
VLAN Settings
Wired LAN Port
Identifies LAN port 1 or 2.
VLAN Mode
Select “Tagged Port” or “Untagged Port” for
specified LAN interface.
VLAN ID
Set a VLAN ID for specified interface, if
“Untagged Port” is selected.
Management VLAN
VLAN ID
Check ‘Override Default Setting’ to specify the
VLAN ID of the management VLAN. Only the
hosts belonging to the same VLAN can manage
the device.

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English