EditShare 24Q - Page 92

92 TP-00347-01
Chapter 6: Troubleshooting
94 Slider outside range, Run 'Library Verify Test', after
several occurrences contact
technical support
Media changer probably
defective.
Slider has reached a position
bey
ond the expected range
Elevator distribution board
def
ect.
Cabling incorrect.
Check slider gears.
95 Elevator outside range, Run 'Library Verify Test', after
sev
eral occurrences contact
technical support
Media changer probably
defective.
Elevator has reached a position
bey
ond the expected range
Elevator distribution board
defect.
Cabling incorrect.
Check elevator gears.
96 Rotation outside range, Run 'Library Verify Test', after
sev
eral occurrences contact
technical support
Media changer probably
defective.
Rotation has reached a position
bey
ond the expected range
Cabling incorrect.
Check rotation gears.
97 Sled outside range, Run 'Library Verify Test', after
sev
eral occurrences contact
technical support
Media changer probably
defective.
Sled has reached a position
bey
ond the expected range
Cabling incorrect.
Check sled gears.
98 Cartridge present sensor not
fo
und
Run 'Library Verify Test', after
several occurrences contact
technical support
Media changer probably
defective.
Media changer controller defect.
Cartridge present sensor defect
(me
chanics, electronics).
Cabling incorrect.
99 Sled home sensor not found Run 'Library Verify Test', after
sev
eral occurrences contact
technical support
Media changer probably
defective.
Media changer controller defect.
Slider home sensor defect
(me
chanics, electronics).
Cabling incorrect.
9A Rotation home sensor not found Run 'Library Verify Test', after
sev
eral occurrences contact
technical support
Media changer probably
defective.
Media changer controller defect.
Rotation home sensor defect
(me
chanics, electronics).
Cabling incorrect.
Error
C
ode Description User Action Critical Component Status