30 Installation and Service Guide: Printer Controller EB-34
Using the EB-34
To shut down, restart, or reboot from the control panel
Always verify that the EB-34 is not in use before you begin the following procedure.
1 Make sure that the EB-34 is not receiving, processing, or printing any files.
If the system has just finished processing, wait at least five seconds after the system reaches Idle before you
proceed.
2 On the control panel, on the Idle screen, press the Menu button.
3 On the Functions menu, select one of the following:
• Restart Server
On the next screen, select one of the following:
• Restart Server
Restarts the EB-34 system software, but not the Windows operating system software on the EB-34.
• Reboot Server
Completely restarts the EB-34, both the EB-34 system software and the Windows operating system software
on the EB-34.
• Shut Down System
Completely shuts down the EB-34.
To shut down, restart, or reboot from the copier touch panel
1 At the copier touch panel, press the Home button.
2 Press the Fiery icon.
1 Up button 5 Display window
2 Menu button 6 First
3 Down button 7 Line selection buttons
4 Activity light 8 Fourth
To Next Page
Loading...
