ELAN HOME SYSTEMS
SYSTEM12 INSTALLATION MANUAL
Page 62 © ELAN Home Systems 2004 • All rights reserved.
Programming (continued)
Video Commands for 16 X 16 Mode
16 X 16 VID OUT 01 thru 16 X 16 VID OUT 16
and
16 X 16 VID IN 03 thru 16 X 16 VID IN 04
• Must use VID OUT and VID IN together.
• The S12 routes a specified Input to a specified
Output.
• The commands must be sent Output first and then
Input.
• Works if the S12 is off or on.
16 X 16 CPN OUT A thru 16 X 16 CPN OUT E
and
16 X 16 CPN IN A thru 16 X 16 CPN IN E
• Must use CPN OUT and CPN IN together.
• The S12 routes a specified inputs to specified
outputs.
• The commands must be sent output first and then
input.
• Works if the S12 is off or on.
External IR
EXTIR OFF 1
• Turns Source IR Emitter Output Port 1 OFF.
EXTIR OFF 2 thru EXTIR OFF 12
• Same as EXTIR OFF 1 except they turn OFF their
respective ports.
EXTIR ALLOFF
• Turns ALL Source IR Emitter Outputs OFF.
EXTIR ON 1 thru EXTIR ON 12
• Same as EXTIR OFF 1 except they turn ON their
respective ports.
EXTIR ALLON
• Turns ALL Source IR Emitter Outputs ON.