Emerson DCX S - Table 7.6 Frequency Bar-Graph Interpretation - 20 Khz (50 Hz Segment); Table 7.7 Frequency Bar-Graph Interpretation - 30 Khz (76 Hz Segment)

100-412-183 REV. 13 99
7.5.2 Frequency Bar-Graph Interpretation
The actual frequency depends on the power supply’s operating frequency. Use Table 7.6
to Table 7.8 below to interpret frequency bar graph readings.
NOTICE
If there is a test overload or an external memory reset signal is
received, then the 50% segment will be displayed and blinking.
Table 7.6 Frequency Bar-Graph Interpretation - 20 kHz (50 Hz Segment)
20 kHz (50 Hz/Segment)
19,475–19,524 19,525–19,574 19,575–19,624 19,625–19,674 19,675–19,724 19,725–19,774 19,775–19,824 19,825–19,874 19,875–19,924 19,925–19,974 19,975–20,024 20,025–20,074 20,075–20,124 20,125–20,174 20,175–20,224 20,225–20,274 20,275–20,324 20,325–20,374 20,375–20,424 20,425–20,474
1 2 3 4
5 (25%)
6 7 8 9
10 (50%)
11 12 13 14
15 (75%)
16 17 18 19
20 (100%)
Table 7.7 Frequency Bar-Graph Interpretation - 30 kHz (76 Hz Segment)
30 kHz (76 Hz/Segment)
29,278–29,353
29,357–29429
29,430–29,501 29,502–29,581 29,582–29,657 29,658–29,733 29,734–29,809 29,810–29,885 29,886–29,961 29,962–30,037 30,038–30,113 30,114–30,189 30,190–30,265 30,266–30,341 30,342–30,417 30,418–30,493 30,494–30,569 30,570–30,645 30,646–30,721 30,722–30,797
1 2 3 4
5 (25%)
6 7 8 9
10 (50%)
11 12 13 14
15 (75%)
16 17 18 19
20 (100%)
Table 7.8 Frequency Bar-Graph Interpretation - 40 kHz (100 Hz/Segment)
40 kHz (50 Hz/Segment)
38,950–39,049 39,050–39,149 39,150–39,249 39,250–39,339 39,350–39,449
39450–39,549
39,550–39,649 39,650–39,749 39,750–39,849 39,850–39,949 39,950–40,049 40,050–40,149 40,150–40,249 40,250–40,349 40,350–40,449 40,450–40,549 40,550–40,649 40,650–40,749 40,750–40,849 40,850–40,949