100-412-183 REV. 13 21
Figure 2.4 LCD Description
Table 2.4 LCD Description
Item Name Function
1 Numeric Display
Displays the power supply amplitude setting, a register
number, or a register value.
2
Sonics Active
Indicator
Indicates ultrasonics is running.
3
Power/
Frequency
Bar Graph
Shows the true percentage of ultrasonic power during a
weld cycle. The bar graph can be configured to show the
peak power or the frequency at the end of each weld or test
cycle. For instructions on how to modify this setting see 7.4
Configuring the Power Supply Registers.
For a detailed bar graph description, and bar graph reading
examples, see 7.5.2 Frequency Bar-Graph Interpretation.
4 Percentage Icon Indicates the value shown is the amplitude setting.
5 Alarm Icon A flashing Icon which indicates an alarm condition.
6
Number Sign
Icon
Indicates that the value shown on the numeric display is a
register number. Use up and down keys to select a register.
For more information see 7.4 Configuring the Power Supply
Registers.
7 Circle Icon
Indicates that the value shown on the numeric display is a
register value. Use up and down keys to modify the register
value. For more information see 7.4 Configuring the Power
Supply Registers.
To Next Page
Loading...
