112 100-412-183 REV. 13
8.1 General Maintenance Considerations
WARNING High Voltage Hazard
Power supplies produce high voltage. To avoid the possibility of an
electrical shock, you should always power down your system prior to
repairing any portion of it.
CAUTION General Warning
When performing maintenance on the welder, make sure that no
other automated systems are active.
NOTICE
There are no customer replaceable components inside the power
supply. Have all servicing done by a qualified Branson technician.
NOTICE
When returning printed circuit boards, make sure to enclose them in
an anti-static package.
NOTICE
Connectors may not be keyed and wires may not be color-coded.
Therefore, when disconnecting cables and wires, label them so you
can reconnect them properly.
To Next Page
Loading...
