Emerson DCX S - Table 5.9 Available Analog Output Functions

60 100-412-183 REV. 13
5.3.11 Available Analog Output Functions
Table 5.9 Available Analog Output Functions
Function Description Valid Range
Amplitude Out
Provides a 0 V to 10 V output signal
proportional to amplitude (0% to 100%).
0 V to 10 V
(0% to 100%)
Power Out
Provides a 0 V to 10 V output signal
proportional to ultrasonic power output (0%
to 100%).
0 V to 10 V
(0% to 100%)
Frequency Out
Provides a 0 V to 10 V output signal that
indicates relative frequency in memory. Actual
frequency depends on the power supply
operating frequency:
0 V to 10 V
(5 V is zero offset)
Frequency
Lower
Limit (0 V)
Upper Limit
(10 V)
20 kHz 19,450 Hz 20,450 Hz
30 kHz 29,250 Hz 30,750 Hz
40 kHz 38,900 Hz 40,900 Hz