100-412-183 REV. 13 29
3.2 Receiving
The DCX S Power Supply is a sensitive electronic device. Many of its components can be
harmed if the unit is dropped or otherwise mishandled.
Scope of Delivery
Branson equipment is carefully checked and packed before dispatch. It is recommended,
however, that you follow the procedure below upon receiving your DCX S Power Supply.
Inspect the Power Supply when it is delivered, take the
following steps:
Table 3.2 Inspect the Power Supply
Step Action:
1 Verify that all parts are complete according to the packing slip.
2 Check the packing and the unit for damage (visual inspection).
3 Report any damage claims to your carrier immediately.
4
Determine if any component has become loose during shipping and, if
necessary, tighten screws.
NOTICE
If the goods delivered have been damaged during shipping, please
contact the forwarding agent immediately. Retain packing material
(for possible inspection or for sending back the unit).
To Next Page
Loading...
