128 100-412-183 REV. 13
8.6 Troubleshooting
If you have a problem operating the DCX S Power Supply, take the following steps:
Table 8.13 Troubleshooting
Step Action
1
Make sure the converter-booster-horn stack is properly assembled and
installed.
2
For instructions on reconditioning stack component surfaces, refer to 8.2.2
Recondition the Stack (Converter, Booster, and Horn).
3 If you need additional help, refer to 1.3 How to Contact Branson.
NOTICE
The DCX S Power Supply should be serviced only by qualified
technicians using Branson-approved test and repair equipment,
repair procedures, and replacement parts. Unauthorized attempts at
repair or modification of the power supply will void the warranty.
To Next Page
Loading...
