Emerson DCX S - Controls and Indicators; Figure 2.3 DCX S Power Supply Front Panel Controls and Indicators; Figure 2.4 LCD Description; Table 2.3 DCX S Power Supply Front Panel Controls and Indicators

20 100-412-183 REV. 13
2.4 Controls and Indicators
2.4.1 DCX S Power Supply Front Panel
Figure 2.3 DCX S Power Supply Front Panel Controls and Indicators
Table 2.3 DCX S Power Supply Front Panel Controls and Indicators
Item Name Function
1LCD
For detailed information refer to Figure 2.4 LCD Description
and Figure 2.4 LCD Description.
2
Up/Down
Arrow Keys
Use to adjust the amplitude of ultrasonic vibrations (10% to
100%). Also used to select registers and edit register
values.
3
Alarm Reset
Key
Use the Reset key to reset alarms. When changing system
registers, use the Reset key to set a register back to its
default value.
4
Configuration
Key
Use the Configuration key to change system registers. For
information on using the Configuration key to set system
registers see 7.4 Configuring the Power Supply Registers.
5
Ultrasonic Test
Key
Use the Test key to turn on Sonics.
6
Power-On
indicator
Lights when the power supply is connected to main power
and the power switch is on.
7
Ethernet
Service Port
Use the Ethernet Service port to connect to the DCX S Power
Supply Web Page Interface.
For detailed information on using the web page interface
refer to the DCX S Power Supply Web Page Interface
Instruction Manual (100-412-187).