Emerson DCX S - Table 8.14 Troubleshooting Common Electrical Problems

100-412-183 REV. 13 129
8.6.1 Common Electrical Problems
NOTICE
If the circuit breaker fails more than once, this usually indicates that
another component has failed. Continue troubleshooting other
components.
Table 8.14 Troubleshooting Common Electrical Problems
Problem Check Solution
Main circuit breaker trips
when plugging the power
supply into an electrical
outlet.
Inspect line connection cables. If failed, replace.
Main circuit breaker trips
during weld cycle.
Check current rating of the
main circuit breaker.
If failed, replace.
Main circuit breaker fails
during power up.
Check main circuit breaker
current rating.
If incompatible,
replace main circuit
breaker.
When touching a component
of the weld system, you get a
slight electrical shock.
Ensure the Ground cable is
connected properly.
N/A
Inspect the line cables.
If failed, repair or
replace.