Emerson DCX S - Table 4.1 Environmental Specifications; Table 4.2 Electrical Input Operating Voltages

34 100-412-183 REV. 13
4.1 Technical Specifications
4.1.1 Environmental Specifications
The DCX S Power Supply has the following environmental specifications:
4.1.2 Electrical Specifications
The following tables list input voltage and current requirements for the DCX S Power
Supply.
* 200 V Min. for 4 kW units.
NOTICE
All specifications are subject to change without notice.
Table 4.1 Environmental Specifications
Environmental Condition Acceptable Range
Ambient Operating Temperature +41° F to +104° F (+5° C to +40° C)
Storage / Shipping Temperature -13° F to +131° F (-25° C to +55° C)
Humidity Maximum 95%, non-condensing
IP Rating 2X
Table 4.2 Electrical Input Operating Voltages
Power Supply Rating Input Operating Voltage
All Models
200 V to 230 V Nominal (180 V Min.* to 253 V Max.), 50 Hz
or 60 Hz, Single Phase.
Table 4.3 Input Current and Circuit Breaker Specifications
Model Power Current Rating
20 kHz
1250 W 7 A Max. @ 200 V / 15 A Breaker
2500 W 14 A Max. @ 200 V / 25 A Breaker
4000 W 25 A Max. @ 200 V / 25 A Breaker
30 kHz
750 W 5 A Max. @ 200 V / 10 A Breaker
1500 W 10 A Max. @ 200 V / 15 A Breaker