100-412-183 REV. 13 43
5.2 Installation Requirements
This section covers the location requirements, mounting options, power supply
dimensions, environmental requirements, and electrical requirements, to help you plan
and execute your installation successfully.
5.2.1 Location
The DCX S Power Supply comes in two different models Horizontal (benchtop) and Vertical
(which may be back mounted or side mounted).
The power supply should be accessible for parameter changes and settings, and it can be
placed in a horizontal or vertical orientation (depending on your selected model). The
power supply should be located in an area away from radiators or heating vents and
positioned so it does not draw in dust, dirt or material via its cooling fan.
A cable clamp can be used to secure wires in place.
Refer to the illustrations on the pages that follow for dimensional drawings of both models.
All dimensions are approximate and may vary slightly:
Figure 5.1 DCX S Power Supply Benchtop Dimensional Drawing
Figure 5.2 DCX S Power Supply Vertical Mount Dimensional Drawing (400 W, 750 W and
800 W)
Figure 5.3 DCX S Power Supply Vertical Mount Dimensional Drawing (1.25 kW and 1.5
kW)
Figure 5.4 DCX S Power Supply Vertical Mount Dimensional Drawing (2.5 kW and 4 kW)
NOTICE
Cable clamp is not included with the unit.
To Next Page
Loading...
