Emerson DL8000 - Modbus Configuration Registers Tab

DL8000 Preset Instruction Manual
B-14 Modbus Communications Revised February-2016
B.5.1 Modbus Configuration Registers Tab
To access this screen:
1. Select Configure > MODBUS. The Modbus Configuration screen
displays.
2. Select the Registers tab. The Modbus Registers screen displays.
Figure B-4: Modbus Configuration – Registers Tab
3. Review the values in the following fields:
Field
Description
Table
Indicates the table to which you are mapping
registers. Click  to display additional tables (up to
24).
Tag
Indicates a label associated with the table number.
Enter up to 10 alphanumeric characters. The system
uses this value on other displays.
Index
Identifies the line number for this register entry.