Emerson DL8000 - Authorize Transaction (0 X06

DL8000 Preset Instruction Manual
Revised February-2016 Communications Protocols D-35
Timeout
Operation
[0x05]
Results
If DL8000 is displaying any prompt or message
then the current operation times out. DL8000
displays "Timeout Operation" and “Please wait”
messages.
Deviations
Clears K&D Locked Out flag.
Authorize
Transaction
[0x06]
Authorizes transaction with selected recipe [63,0,118], additive [63,0,112],
and data items [63,0,188;190;192;194;196]. The TAS can override the
operator selection and provide a new recipe, additive, or data items as part of
this command. DL8000 displays the “Transaction Auth” and “Please Wait”
messages.
Note: The TAS can read user-entered data items using the Display Message
command (0x1C).
Flags Immediately Set
Transaction Authorized
Flags Immediately
Cleared
 Recipe Selected
 Additive Selected
 Transaction Ended
 Transaction End Requested
 Transaction in Progress