Emerson DL8000 - Independent Detector Wiring on APM; Two-Pulse Turbine Pulse Input Wiring on APM

DL8000 Preset Instruction Manual
Revised February-2016 Modules 3-25
DET SW 1
DET SW 2
METER
-
+
METER
COIL 2
-
+
-
+
+T
METER
-
+
POWERED
EXTERNALLY
PREAMP
PREAMP
EXTERNALLY POWERED
+T
COIL 1
Figure 3-27. Independent Detector Wiring on APM Figure 3-28. Two-Pulse Turbine Pulse Input Wiring
on APM
DEVICE
EXTERNAL
CONTROL
NO CONNECTION
+12
10K
Figure 3-29. Pulse Output Wiring on APM
DIP Switch
Settings
The APM card’s daughterboard contains several DIP switches which
you use to control the module’s activities. See Figure 3-30 for the
switch locations and labels; see Table 3-6 for the settings.