Emerson DL8000 - Backplane

DL8000 Preset Instruction Manual
Revised February-2016 Installation and Use 2-7
A
CPU
B
Power module
C
Module cover
D
Wire channel covers (removed)
Figure 2-5. Card Cage (with modules)
2.2.1 12BBackplane
The backplane has connectors for the CPU, the power input module, and
all the I/O and communication modules. When a module is completely
inserted into the module slot, the connector on the module fits into one
of the connectors on the backplane. The backplane does not require any
wiring, and there are no jumpers associated with the backplane.
Removing the backplane from the housing is not recommended, as there
are no field-serviceable parts. If the backplane requires maintenance,
please contact your local sales representative.
C
A
B
D