Emerson DL8000 - E.3.7 Display Setting

DL8000 Preset Instruction Manual
E-16 DL8000 Keypad Display Revised February-2016
E.3.7 Display Setting
This screen displays when you select Display Setting on the Program
Mode screen. Use it to adjust the backlighting and contrast on the
display.
 14/02/12 13:58:59
Display Setting
(Press
<– for Menu )
( ENTER to accept )
Contrast Adjust
Backlight Adjust
This menu has options you use to adjust the contrast or backlighting on
the display.
Adjust the
Contrast
Use this option to increase or decrease the contrast on the display. Press
SELECT to restore the contrast to factory defaults. Press ALT+ to
return to the program menu.

14/02/12 13:58:59
Contrast Adjust
(Press
<– for Menu )
ALT 3 to Increase
ALT 6 to Decrease
SELECT for default
Adjust the
Backlight
Use this option to increase or decrease the backlighting on the display.
Press SELECT to restore the backlight to factory defaults. Press
ALT+ to return to the program menu.
E.3.8 Current Status
Use this menu to review the status of parameters such as totalizers and
alarms. You cannot change any of the displayed values. When you
select Current Status on the Program Mode screen, the program
displays an intermediate screen with navigational options:
 14/02/12 13:58:59
For traversing use
UP | DOWN
LEFT | RIGHT
ENTER To Continue
EXIT To Go Back
EXIT To Quit
System
Stream
Additive
Meter
(Pg:1/1)