DL8000 Preset Instruction Manual
Revised February-2016 DL8000 Keypad Display E-13
The Navigation Setup screen displays. Select the PINs tab to display the
PINs screen:
A. Default administrative PINs
Figure E-5. PINs Screen
PIN 1 has a factory default of 8000; PIN 2 is blank. Define four-digit
codes appropriate to your organization. Be sure to click Apply to save
your changes.
Note: The two administrative PINs (1 and 2) can access all program
mode options. Although all other PINs can access program
mode, their access is limited to a subset of options (Clear
Alarms, Select Language, Print Records, Display Settings, and
Current Status).
E.3.2 Log In
This screen displays when the operator selects Log In on the Program
Mode screen. The operator completes this screen with a valid four-digit
personal identification number (PIN) to access program mode screens.
To Next Page
Loading...
