Emerson DL8000 - Keypad

DL8000 Preset Instruction Manual
2-24 Installation and Use Revised February-2016
2.8.1 26BKeypad
The DL8000 keypad enables the operator to select recipes, enter the
desired preset quantity, control batch deliveries, and (with appropriate
authority) program the DL8000. See Figure 2-11.
A: Weights & Measures Switch
Figure 2-11. DL8000 Keypad
Key
Function
0 through 9
Provide numeric digits for data entry.
ALT+3 increases the brightness of the display;
ALT+6 decreases the brightness of the display.
Note: The alphabetic values on the numeric keys
are currently not supported.
ENTER/PROGRAM
Accept the manually entered value and continue.
Note: The ALT+PROGRAM function is not currently
supported.
CLEAR/EXIT
Reject the manually entered value and continue.
ALT+EXIT leaves the display.
SELECT/BKSP
Toggle the On/Off option for each defined additive.
ALT+BKSP (Backspace) moves the cursor position
back one character at a time.

/

Scroll down or move the select box to the next item
in the Recipes Selection display.
ALT+

moves to the next display.

/

Scroll up or move the select box to the previous item
in the Recipes Selection display.
ALT+

moves to the next display.
START
Initiate the batch loading operation after batch setup
data has been entered.
STOP/PRINT
Stop the batch loading operation.
Note: The ALT+PRINT function is not currently
supported.
ALT
Enable alternative functions on selected keys.
A