Emerson DL8000 - Modbus Configuration; B.2 Modbus Configuration

DL8000 Preset Instruction Manual
B-2 Modbus Communications Revised February-2016
B.2 Modbus Configuration
From the ROCLINK 800 menu bar, select Configure > MODBUS. The
Modbus Configuration screen displays, showing the General tab (see
Figure B-1). Use the individual tabs to:
Tab Use
General
Defines basic communication parameters
Scale Values
Defines up to eight low and high floating point scale
values and one low and high integer value for converting
floating point numbers to a scaled integer.
Master Table
Simulates Modbus settings.
Master Modem
Configures modems and maps RTU addresses to phone
numbers.
Registers
Maps Modbus registers to TLP values using either point
indexing or parameter indexing.
History Table
Configures periodic and daily history values.
Figure B-1. Modbus Configuration – General Tab