Emerson DL8000 - Operator Interface

DL8000 Preset Instruction Manual
Revised February-2016 Installation and Use 2-23
2.8 8BOperator Interface
Note: Refer to Appendix E, DL8000 Keypad Display, in this manual
for a complete discussion of the features and functionalities of
the DL8000 keypad display.
The DL8000’s keypad display has the following parts:
A: Display
B: LED Status Indicators
C: Keypad
Figure 2-10. DL8000 Operator Interface
Component
Use
Keypad
Enables the operator to select recipes, enter the
desired quantity, and control batch deliveries.
Note: With appropriate authority, the operator can
also program the DL8000.
Display
A liquid crystal display (LCD) panel divided into two
sections (right and left). Each section provides
eight lines of up to 40 characters in width. The
display and keypad provide the primary method for
operating the DL8000.
LED Status Indicators
Three light-emitting diodes (LEDs) display through
the vertical window to the right of the LCD,
indicating the DL8000’s operational status.
A
C
B