Emerson DL8000 - Page 298

DL8000 Preset Instruction Manual
E-80 DL8000 Keypad Display Revised February-2016

14/03/12 12:26:02
Test DI Ch
Use DO Ch
(SELECT)
DI ch 1
DO ch 1
Note: For an external source, select None.
 14/03/12 12:26:02
Test DI Ch
Use DO Ch
(SELECT)
DI ch 1
NONE
When you select the DO channel option, the program displays the
current status of the DI and DO.

14/03/12 12:26:02
Test DI Ch
Use DO Ch
DI Current Status
DO Current Status
(SEL to toggle Sts )
DI ch 1
NONE
OFF
OFF
(STOP to End )
The status of the DI should match either the status of the connected DO
channel (if you selected a DO) or the external status of the external
source.
Press SELECT to toggle the status of DO channel. The DI status should
update accordingly. (This option is available only if you select the DO
channel.).
Press STOP to end the test for current channel. It restores all the
original values to the updated TLPs and redisplays the Select Channel
screen:
 14/03/12 12:26:02
Test DI Ch
Use DO Ch
(SELECT)
DI ch 1