Emerson Rosemount 5402 - Viewing Measurement Data in AMS Suite and DeltaV

142
Reference Manual
00809-0100-4026, Rev KC
Configuration
October 2018
Configuration
Analog-Input Block
Figure 5-17. Analog-Input Block
The AI function block processes field device measurements and makes them available to other function
blocks. The output value from the AI block is in engineering units and contains a status indicating the
quality of the measurement. The measuring device may have several measurements or derived values
available in different channels. Use the channel number to define the variable that the AI block processes
and passes on to linked blocks. For further information, see Appendix I: Analog-Input Block.
For more information on the different function blocks, see Appendix E: Level Transducer Block,
Appendix F: Register Transducer Block, Appendix G: Advanced Configuration Transducer Block,
Appendix H: Resource Block, and Appendix I: Analog-Input Block.
Function blocks
The following function blocks are available for the Rosemount 5400:
 Analog Input (AI)
 Proportional/Integral/Derivative (PID)
 Control Selector (CS)
 Output Splitter (OS)
 Integrator (IT)
 Arithmetic (AR)
 Input Selector (IS)
For detailed information about F
OUNDATION Fieldbus technology and function blocks used in the
Rosemount 5400, see the F
OUNDATION Fieldbus Blocks Reference Manual.
OUT = The block output value and status
OUT_D = Discrete output that signals a selected alarm condition
OUT_D
OUT
AI