Advanced Configuration
October 2018
Reference Manual
00809-0100-4026, Rev KC
Advanced Configuration
269
C.5.4 Surface echo tracking
The Surface Echo Tracking function can eliminate ghost echo
problems below the product surface. This may occur in still-pipes
because of multiple reflections between the pipe wall, flange, and
antenna. In the tank spectrum, these echoes appear as amplitude
peaks at various distances below the product surface.
To activate this function, select the Always Track First Echo check-box
making sure there are no disturbing echoes above the product
surface when this function is activated.
Amplitude
Distance
First echo corresponding to
the product surface
Surface
To Next Page
Loading...
