Advanced Configuration Transducer Block
October 2018
Reference Manual
00809-0100-4026, Rev KC
296
Advanced Configuration Transducer Block
AMPLITUDE_THRESHOLD_
CURVE
14
0x00000000(Und
efined)
0
Command. The following sub-elements are
available:
ACTION
VALUE
SIMULATION_MODE 15 0x00000000
(0x00000000)
0
Simulation of measurement values. The
following sub-elements are available:
ACTION
VALUE
SURFACE_SEARCH 16
0 If the device has locked on a false echo, you
can use this function to force the device to
search for the product surface echo within
the whole tank.
SET_EMPTY_TANK 17
0x00000000(No
Action)
Command.
SET_CONSTANT_THRESHOLD 18
0 A constant amplitude threshold can be
used to filter out noise.
ECHO_UPDATE 19
0x00000000
(Uninitialized)
ECHO_FOUND_DISTANCE 20 0
ECHO_FOUND_AMPLITUDE 21 0
ECHO_FOUND_CLASS 22 0x00(Unknown)
ECHO_COMMAND 23
0x00000000
(Uninitialized)
The following sub-elements are available:
ACTION
VALUE
ECHO_FALSE 24 0
VOL_VOLUME_CALC_METHO
D
25
0x000000fb(Non
e)
VOL_IDEAL_DIAMETER 26 20 Tank diameter
VOL_IDEAL_LENGTH 27 20 Tank length
VOL_VOLUME_OFFSET 28 0 Volume offset
VOL_STRAP_TABLE_LENGTH 29 2 Number of strap points
VOL_STRAP_LEV_1 30 0 Strap value level
VOL_STRAP_VOL_1 31 0 Strap value volume
VOL_STRAP_LEV_2 32 10 Strap value level
VOL_STRAP_VOL_2 33 10 Strap value volume
VOL_STRAP_LEV_3 34 0 Strap value level
VOL_STRAP_VOL_3 35 0 Strap value volume
VOL_STRAP_LEV_4 36 0 Strap value level
VOL_STRAP_VOL_4 37 0 Strap value volume
VOL_STRAP_LEV_5 38 0 Strap value level
VOL_STRAP_VOL_5 39 0 Strap value volume
Parameter
Index
number
Default value Description
To Next Page
Loading...
