Emerson X-STREAM XE - Page 217

Emerson Process Management GmbH & Co. OHG 6-55
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
6
Software Menus
Ch1
Cross Interference
Activated: Off
IF Source1..
IF Source2..
IF Source3..
IF Source4..
6.2.3.3.4 Setup Cross Interference
6.2.3 Setup Menu
Setup..
Measurement..
Cross Interference..
Enable (On) or disable (Off) cross interfe-
rence compensation for the selected channel.
If the 3
rd
parameter CalibOff is selected, cross
interference compensation is activated, but
disabled during calibrations.
Up to four sources of concentration values
can be congured for compensation. These
submenus are exemplied on
6-56.
This menu enables to congure up to four
sources (internal or external) for cross inter-
ference compensation.
7-44 for more information about this
menu.