Enterasys RoamAbout RBT-4102 - Page 31

Initial Setup Using the CLI
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 3-5
.
•Ifapplicable,theCountyCodepageappears,gotostep3.
•IftheCountryCodepagedoesnotappear,gotostep4.
3. Ifapplicable,settheCountry:
a. ClickonthearrowintheCountrypull‐downmenutoselecttheappropriatecountry,then
clickApplyatthebottomof
thepage.
b. ClickAdministrationfromthemenuontheleft‐handsideofthepage.
TheAdministrationpageappears.