Enterasys RoamAbout RBT-4102 - Page 32

Initial Setup Using the CLI
3-6 Initial Configuration
c. ClicktheResetbuttonnexttoResetAccessPoint,locatedatthebottomofthepage.
Theaccesspointpromptsyoutoconfirmthatyouwanttorebootthesystem.
d. ClickOK.
Theaccesspointreboots,andtheLoginwindowappears.
e. Entertheusernameadminandthepasswordpassword,andclickLOGIN
.
TheIdentificationwindowappears.
f. Gotostep4.