Enterasys RoamAbout RBT-4102 - Page 81

System Log
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-45
• LoggingLevelsetstheseveritylevelforeventlogging.
• LoggingFacility‐Typespecifiesthesyslogfacilitytouseformessages,(16to23)local0to
local7.
Thesystemallowsyoutolimitthemessagesthatareloggedbyspecifyingaminimumseverity
level.Table 4‐4liststheerrormessage
levelsfromthemostsevere(Emergency)toleastsevere
(Debug).Themessagelevelsthatareloggedincludethespecifiedminimumleveluptothe
Emergencylevel.
Table 4-4 Logging Level Descriptions
Error Level Description
Emergency Immediate action needed
Alerts Immediate action needed
Critical Critical conditions (such as, memory allocation, or free memory error - resource
exhausted)
Error Error conditions (such as, invalid input, or default used)
Warning Warning conditions (such as, return false, or unexpected return)
Notice Normal but significant condition, such as cold start
Informational Informational messages only
Debug Debugging messages
Note: The access point error log can be viewed using the Event Logs window in the Status section
(refer to “Using Web Management to View Event Logs” on page 4-108).The Event Logs window
displays the last 128 messages logged in chronological order, from the newest to the oldest. Log
messages are erased when the device is rebooted.