Installing the Printer Driver
97
6
6
6
6
6
6
6
6
6
6
6
6
Note:
❏
Announce the share name to your clients so that they know the
sharenameoftheprintertheywanttouse.
❏
If the Add Printer wizard prompts you to select either Keep
existing driver or Replace existing driver, be sure to select
the Replace existing driver radio button.
8. Click
Finish
and follow the on-screen instructions to complete
the setup.
When you print using Microsoft Network Shared printing in
theWindows 2000/NT/XP environment, see“Using theNET
USE command” on page 97 for more details.
Using the NET USE command
If you are running Windows 2000/NT/XP and using NetBIOS to
connect to the Internal Print Server, we recommend that you use
the NET USE command, as follows:
1. Check that the following services are installed.
Right-click the
Network Neighborhood
icon on the desktop
and select
Properties
.Clickthe
Services
tab and check that
Server
or
Workstation
is listed.
2. If it is not installed, click
Add
.
3. Run the command prompt and enter the following command.
NET USE
printer port
:\\
NetBIOS name of Internal Print
Server
\
Device name of Internal Print Server
Selecting the port
1. Click
Start
, point to
Settings
, and then select
Printers
.
2. Right-click the printer icon and then select
Properties
.
To Next Page
Loading...
