42
EpsonNet WinAssist Configuration Utility
Installing EpsonNet WinAssist
Follow the steps below to install EpsonNet WinAssist.
Note:
If you add or delete protocols or services in your operating system after
installing EpsonNet WinAssist, EpsonNet WinAssist may not work
correctly. If this happens, uninstall EpsonNet WinAssist and then
reinstall it.
1. Insert the software CD-ROM shipped with the printer in the
CD-ROM drive.
2. The EPSON Installation Program starts automatically.
If the EPSON Installation Program does not start
automatically, click Start and then Run (Windows
Me/98/95/2000/NT 4.0); or choose Run fromtheFilemenu
in the Program Manager (NT 3.51). Type D:\EPSETUP.EXE
and then click OK. (Substitute the appropriate letter for your
CD-ROM drive if necessary.)
3. Double-click
Install
EpsonNet WinAssist.
4. Follow the on-screen instructions to complete the installation.
To start EpsonNet WinAssist, click Start,pointtoPrograms and
EpsonNet WinAssist, and then select EpsonNet WinAssist
(Windows Me/98/95/2000/NT 4.0); or double-click the
EpsonNet WinAssist icon in the EpsonNet WinAssist window
(NT 3.51).
To Next Page
Loading...
