Epson AcuLaser C8600 - Appendix B Setting an IP Address for the Printer; Setting an IP Address on the Printers Control Panel

Setting an IP Address for the Printer
229
B
B
B
B
B
B
B
B
B
B
B
B
Appendix B
Setting an IP Address for the Printer
Setting an IP Address on the Printer’sControl
Panel
After connecting the printer to the network, you need to set the
IP address for the Internal Print Server.
To set the IP address, subnet mask, and default gateway from the
control panel, follow the steps below.
1. Turn on your printer.
2. Press the
Enter
,
Up
,
Down
,or
Back
button on the printer's
control panel once to enter the SelecType mode. The LCD
panel displays
Information Menu
.
3. Press the
Up
or
Down
button until
Network Menu
appears.
Then press the
Enter
button.
4. Check that
Network I/F = On
appears.
If
Network I/F = Off
appears instead, press the
Enter
button
and then the
Up
or
Down
button to change to
Network I/F =
On
. Then press the
Enter
button.
5. Press the
Up
or
Down
button until
Network Config = No
appears. Press the
Enter
button and then the
Up
or
Down
button to change to
Network Config = Yes
.Pressthe
Enter
button.