Epson AcuLaser C8600 - Chapter 4 Epsonnet Winassist Configuration Utility; About Epsonnet Winassist; System Requirements

EpsonNet WinAssist Configuration Utility
41
4
4
4
4
4
4
4
4
4
4
4
4
Chapter 4
EpsonNet WinAssist Configuration Utility
About EpsonNet WinAssist
After changing the network settings of your computer, you need
toconfigurethe Internal PrintServerfor use onthenetwork, using
EpsonNet WinAssist/MacAssist.
EpsonNet WinAssist is a Windows-based configuration software
for administrators to configure the Internal Print Server for
TCP/IP, NetWare, NetBEUI, AppleTalk, IPP, and SNMP.
Note:
❏
EpsonNet MacAssist is a Macintosh-based configuration software.
See “About EpsonNet MacAssist” on page 69 for details.
❏
Be sure to use EpsonNet WinAssist included on the software
CD-ROM shipped with this printer.
System Requirements
The following table lists the system requirements of EpsonNet
WinAssist.
Operating systems Windows Me/98/95
Windows 2000 Server/Professional
Windows NT 4.0 Server/Workstation with Service Pack
3.0 or higher
Windows NT 3.51 Server/Workstation with Service
Pack 5.0 or higher
Hard disk drive space 4 MB