EasyManua.ls Logo

Epson AcuLaser C8600 - About the Software

Epson AcuLaser C8600
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
5
Note:
Only the Intel version of Windows NT is supported.
The multi-user environment of Mac OS 9 is not supported.
If you use the printer in a dial-up router environment, you must set
an IP address for the printer. Make sure the IP address is suitable
for the segment; incorrect IP address may generate unexpected
dial-up.
About the Software
EpsonNet WinAssist is a Windows-based configuration
utility for administrators that allows you to configure the
Internal Print Server for TCP/IP, NetWare, NetBEUI,
AppleTalk, IPP, and SNMP. In particular, you can use
EpsonNet WinAssist Easy Setup to easily configure the
Internal Print Server for TCP/IP and NetBEUI. See About
EpsonNet WinAssist on page 41 for detailed information.
UNIX Sun OS 4.1.4 or
later: SPARC
lpr, ftp
SunSoft Solaris
2.4 or later:
SPARC and x86
SCO UNIX 4.2 or
later
SCO UnixWare
2.01 or later
HP/UX 9.05 or
later
IBM AIX 3.2.5 or
later and 4.1.3 or
later
OS Version Protocol

Table of Contents

Other manuals for Epson AcuLaser C8600

Related product manuals