64
EpsonNet WinAssist Configuration Utility
Tool menu:
❏ Timeout
Sets the time-out value between 2 and 120 seconds. See
“Time-out option” on page 64 for more information.
❏ Search Options
Configuresthe options for a search with IP or IPX.See “Search
options” on page 65 or for more information.
Help menu:
❏ Help Topic
Opens EpsonNet WinAssist help.
❏ About EpsonNet WinAssist
Displays the copyright and version information for EpsonNet
WinAssist.
Time-out option
Sets the length of time before a time-out occurs (between 2 and
120 seconds). A communication error occurs if this time is
exceeded. The default value is 6 seconds. If you set a larger value,
it takes more time to search the network printers. Therefore,
change this value only if you prefer.
To Next Page
Loading...
