Epson AcuLaser C8600 - Configuring for Netware Using Epsonnet Winassist; Setting the Printer on Client Workstations

Settings for NetWare Server
131
7
7
7
7
7
7
7
7
7
7
7
7
Configuring for NetWare using EpsonNet
WinAssist
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure thatthe oneof the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu. See
“Configuring Your Printer Using EpsonNet WinAssist” on
page 43 for details.
If the IP address of the printer is already assigned, you can
use EpsonNet WebAssist too. See “NetWare” on page 195 for
details.
Setting the printer on client workstations
After configuring the print server, set up the printer on client
workstations.
Installing printers automatically
1. Run the Novell Printer Manager from Windows. If you are
running Windows Me/98/95/2000/NT, run:
\PUBLIC\WIN32\NWPMW32.EXE
2. In the Novell Printer Manager dialog, select
New
from the
Printer menu.