52
EpsonNet WinAssist Configuration Utility
Print Server mode
To use the printer with Print Server mode, configure the Internal
Print Server on this screen.
Note:
When you savethe settings, the Printer Objects,named PR0for Bindery
mode or print server name_P0 for NDS mode, are automatically
created. To change the printer name, use PCONSOLE or NWADMIN.
Items Explanations
use NetWare Select this box when using NetWare. This check
box is dimmed when using the printer only in the
NetWare environment.
Mode Select the mode, either Print Server/Bindery or
Print Server/NDS.
To Next Page
Loading...
