EpsonNet MacAssist Configuration Utility
73
5
5
5
5
5
5
5
5
5
5
5
5
Network Number Set:
Select either
Auto
or
Manual
.
Auto
is usually preferred.
Network Number for Manual Mode:
Type a value between 0 and 65534 when
Manual
is selected
for Network Number Set.
7. After making settings, click
Send
. The Password dialog box
appears.
8. Enteryour password (up to20 characters) andclick
OK
tosave
settings. If you are entering a password for the first time, click
Change
and set the password. For more information about
passwords, see “About passwords” on page 73.
After updating is complete, refresh the configuration. To do
this, quit and restart EpsonNet MacAssist.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, wait until an on-screen message
appears to indicates that you can turn off your printer.
About passwords
The password is required to configure the Internal Print Server.
When you click
OK
in the setting dialog box or click
Return to
default
, the Password dialog box appears.
1. To set the password or to change the current password, click
Change
.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click
OK
. Passwords are case
sensitive.
To Next Page
Loading...
