72
EpsonNet MacAssist Configuration Utility
Note:
Whenever the printer is turned on, you need to change the printer
port setting if Auto is selected for Get IP address.ForTCP/IP
printing, we recommend selecting Manual and setting the IP
address manually.
IP Address:
Enter an IP address. Be sure to give an IP address which does
not conflict with any other device on the network. The default
value is 192.168.192.168.
Subnet Mask:
Enter the Subnet Mask. The default value is 255.255.255.0.
Default Gateway:
Enter the default gateway address. If there is a server or a
router which functions as a gateway, enter the IP address of
the server or the router. If there is no gateway, leave the
default values. The default value is 255.255.255.255.
6. Set the following options in the AppleTalk Configuration box.
Printer Name:
Enter the printer name(up to 32 characters). The default name
is shown below.
Printer product name-xxxxxx
(xxxxxx is a substitute for the last 6 digits of the MAC address)
Entity Type:
Displays the printer’s entity type. Do not change the entity
type unless “epson” is displayed. If “epson” is displayed, you
need to enter the entity type to matchthe driverfor theprinter.
Zone Name:
Select the network zone in which you want the printer to
appear. To have the zone selected automatically, select Auto
as the Network number set option and enter an asterisk (*) in
this box.
To Next Page
Loading...
