Settings for NetWare Server
109
7
7
7
7
7
7
7
7
7
7
7
7
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with the bindery
connection.
3. Configure the Internal Print Server using EpsonNet
WinAssist. See “Configuring Your Printer Using EpsonNet
WinAssist” on page 43 for details.
If NetWare objects are already created, you can also use
EpsonNet WebAssist. See “NetWare” on page 195 for details.
Using NDS Print Server (NetWare 4.x/5.x/6.0)
This section contains instructions for using the Internal Print
Server in the Print Server mode on NetWare 4.x, IntranetWare,
NetWare 5.x, or NetWare 6.0 with NDS mode.
1. Turn on your printer.
2. From any NetWare client, log in to the target context of the
NDS tree as an ADMIN.
3. Configure the Internal Print Server using EpsonNet
WinAssist. See “Configuring Your Printer Using EpsonNet
WinAssist” on page 43 for details.
If NetWare objects are already created, you can also use
EpsonNet WebAssist. See “NetWare” on page 195 for details.
To Next Page
Loading...
