186
EpsonNet WebAssist
RITech Select whether or not to adjust the RITech
setting.RITproduces smootherandcrisper lines,
text, and graphics.
Toner Save Selectwhether or not to save toner.When on, the
printer consumes less toner but print quality is
reduced.
Top Offset Enter a value to adjust the printing start position
from the top on the paper.
Left Offset Enter a value to adjust the printing start position
from the left on the paper.
Top Offset B Enter a value to adjust the vertical printing
position on the back side when printing on both
sides. Available only when the Duplex Unit is
installed.
Left Offset B Enter a value to adjust the horizontal printing
position on the back side when printing on both
sides. Available only when the Duplex Unit is
installed.
Size Ignore Select whether or not a paper size error is
ignored.
Auto Continue Select whether or not to permit the printer to
automatically continue printing after a certain
period of time when one of the following error
occurs: paper set, print overrun, or insufficient
memory error.
Page Protect Selectwhetherornottoallocateadditionalprinter
memoryforprintingdata,asopposed to receiving
it.
Image Optimum Reduces the amount of graphics data when the
data reaches the memory limit, allowing complex
documents to be printed.
Paper Type Select the paper type.
Paper Side When you print on thick or extraThk paper or
envelope, select the paper side to be printed.
Set button Saves any changes.
Refresh button Clears any changes and reloads the previous
settings.
To Next Page
Loading...
