12
Getting Started
c
Caution:
You must use a Category-5 shielded twisted-pair cable to connect
the Internal Print Server to a network to prevent malfunctions.
Printing a Network Status Sheet
Before you start configuring the Internal Print Server, be sure to
print a network status sheet which contains important
information such as the current configuration and the MAC
address of the Internal Print Server.
To print a network status sheet, follow the steps below.
1. Press the Enter, Up, Down,orBack button on the printer's
control panel once to enter the SelecType mode. The LCD
panel displays
Information Menu
.
2. Press the Enter button.
3. Press the Down button until
Network Status Sheet
appears
on the LCD panel.
4. Finally, press the Enter button to print a network status sheet.
Note:
❏ You cannot print a status sheet in the following cases: the printer
has started printing, it is offline, or it is not ready to print.
❏ SeetheReferenceGuideformoreinformationontheprinter’s
control panel.
To Next Page
Loading...
