Introduction
3
Functions of the Internal Print Server
❏ Your printer has a built-in Ethernet interface, which is called
Internal Print Server in this manual.
❏ TheInternal PrintServer automatically selects either 10Base-T
or 100Base-TX when it is connected to a network.
❏ An IP address is automatically assigned to the Internal Print
Server even if there is no DHCP server on your network.
❏ The Internal Print Server is equipped with SSDP (Simple
Service Discovery Protocol) to support Universal Plug and
Play.
❏ The Internal Print Server supports multiple protocols, such as
TCP/IP, NetWare, NetBEUI, AppleTalk, IPP, and SNMP.
❏ BecausetheInternalPrintServer supports PrinterMIB,SNMP
settings such as SNMP community, IP trap, and IPX trap
settings become available with EpsonNet WinAssist and
WebAssist.
Operating Environment
Your printer supports the following environments.
OS Version Protocol
Windows 98/95 - TCP/IP (using EpsonNet Direct
Print)
IPP (using EpsonNet Internet
Print)
NetBEUI
To Next Page
Loading...
