EpsonNet WinAssist Configuration Utility
47
4
4
4
4
4
4
4
4
4
4
4
4
11. Select the
Universal Plug and Play function
check box if you
want to use the Universal Plug and Play function in
Windows Meorfutureoperatingsystems.Changethedefault
Universal Plug and Play device name, if desired. This device
name is used for Windows that supports the Universal Plug
and Play function.
12. After changing the settings, click
OK
. The Password dialog
box appears.
13. Enter your password (up to 20 characters) and then click
OK
to save the settings. If you are entering a password for the first
time, click
Change
and set the password. For more
information on passwords, see “About passwords” on page
47.
Follow the on-screen instructions. After the update is
complete, refresh the configuration by selecting
Refresh
from
the View menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, wait until an on-screen message
appears to indicates that you can turn off your printer.
Print a network status sheet to confirm the new IP address.
About passwords
A password is required to configure the Internal Print Server.
When you click
OK
in the setting dialog box or click the
Return to
default
button, the Password dialog box appears.
To Next Page
Loading...
