EpsonNet WebAssist
197
11
11
11
11
11
11
11
11
11
11
11
11
TCP/IP
Items Explanations
Get IP Address Select a method for acquiring IP addresses. If
Auto is selected, DHCP becomes available. To
use the DHCP server, it must be installed in your
computer and must be correctly configured. See
your operating system’s online help for detailed
instructions.
To set the IP address manually, select Manual.
IP Address Enter an IP address for the Internal Print Server if
set to Manual. Be sure to give an IP address which
does not conflict with any other device on the
network.
Subnet Mask Set the subnet mask.
Default Gateway Set the gateway address if needed.
Use a private IP address
when an IP address cannot
be assigned by the DHCP
server
Select Enable to get the private address between
169.254.1.1 and 169.254.254.254 automatically
when an IP address cannot be obtained by the
DHCP server.
Set by PING Enables or disables IP address setting using the
ping command.
Universal Plug and Play Enables or disables Universal Plug and Play.
Universal Plug and Play
Device Name
Enter the device name (up to 63 characters). The
first character of the device name must be an
alphabet.
SUBMIT button Saves any changes.
To Next Page
Loading...
