80
Installing the Printer Driver
3. Click the Have Disk button. The Install From Disk dialog box
appears.
4. Click Browse.
5. Select the CD-ROM drive for Drives, and then double-click
the folder named after your operating system. Click OK.
6. Click OK in the Install From Disk dialog box.
7. Select the model name of the printer, and then click Next.
Note:
If the Add Printer wizard prompts you to select either Keep
existing driver or Replace existing driver, be sure to select the
Replace existing driver radio button.
8. Click Finishand follow the on-screen instructions to complete
the setup.
When you print using Microsoft Network Shared printing in
theWindows 2000/NT/XP environment, see“Using theNET
USE command” on page 80 for more details.
Using the NET USE command
If you are running Windows 2000/NT/XP and using NetBIOS to
connect to the printer, we recommend that you use the NET USE
command, as follows:
1. Right-click the Network Neighborhood icon or My Network
Places icon and then select Properties.
2. Check that Client forMicrosoftNetworksis in the Components
list. If it is not installed, click Add to install it.
3. Run the command prompt and enter the following command.
To Next Page
Loading...
