224
Tips for Administrators
Using the Printer Software with Windows
Registering form overlay data on an Optional
Hard Disk Drive
This procedure can be performed only by a network
administrator running Windows XP/2000/NT 4.0. Use the
following steps to register a form overlay.
1. Prepare the form overlay data on the local hard disk drive.
2. Login to Windows XP, Windows 2000, or Windows NT 4.0 as
an administrator.
3. To access the printer driver from Windows, click Start,point
to Settings, and then select Printers. Next, right-click the
EPSON AL-CXXXX Advanced icon and then select
Properties.
4. Click the Optional Settings tab.
5. Click Register. The Register to HDD dialog box appears.
6. Select the overlay data name from the Form Names list, and
then click Register.
Note:
Only form names that can be registered appear in the Form Name
list. A form name that contains characters other than letters and
numbers is not displayed. Monochrome form overlay data that has
been made on a monochrome printer or printer in a black mode is
not displayed.
7. If you want to distribute a sheet of form data list to the clients,
click the Print List button to print the list.
8. Click OK to close the window.
To Next Page
Loading...
